Configuring settings of the network interface

If you are using the

distributed solution

Two-level hierarchy of servers with Central Node components installed. This hierarchy allocates a primary control server (Primary Central Node (PCN)) and secondary servers (Secondary Central Nodes (SCN)).

multitenancy mode

Operation mode in which Kaspersky Anti Targeted Attack Platform is used to protect the infrastructure of multiple organizations or branch offices of the same organization simultaneously.

To configure the network interface:

1. In the window of the program web interface, select the Settings section, Network settings subsection.
2. Select the network interface whose settings you want to configure.

   This opens the Edit network interface window.

3. In the State settings group, select one of the following options:
   • Disabled.
   • Enabled, using DHCP server if you want the settings received from the DHCP server to be used for the network interface.
   • Enabled, manual configuration if you want the manually configured network interface to be used.
4. If you selected Enabled, manual configuration, specify values for the following parameters:
   1. In the IP field, specify the IP address of the network interface.
   2. In the Subnet mask field, specify the subnet mask of the network interface.
   3. In the Gateway text box, enter the IP address of the gateway.
5. Click Save.

The settings of the network interface will be configured.