Hardware and software requirements

One of the following browsers must be installed on the computers in order to configure and work with the application over the web interface:

• Mozilla Firefox for Linux.
• Mozilla Firefox for Windows.
• Google Chrome for Windows.
• Google Chrome for Linux.
• Edge (Windows).
• Safari (Mac).

Minimum screen resolution to use web interface: 1366x768.

Deploying the application on a virtual platform requires installing the VMware ESXi hypervisor version 6.7.0 or 7.0.

For the application to work correctly in a virtual environment, you must install an up-to-date patch for the hypervisor.

The configuration of the servers hosting the Central Node, Sandbox and Sensor components depends on the volume of data processed by the application and the bandwidth of the communication channel.

For the Central Node, Sensor and Sandbox hardware requirements see the Sizing Guide.

Requirements for Kaspersky Endpoint Agent for Windows

This section describes hardware and software requirements of Kaspersky Endpoint Agent 3.14 for Windows.

If the version of Kaspersky Anti Targeted Attack Platform on the Central Node servers is incompatible with the version of Kaspersky Endpoint Agent 3.14 for Windows that is installed on the computers of the corporate LAN, the functionality of Kaspersky Anti Targeted Attack Platform may be limited.

Kaspersky Endpoint Agent for Windows has predefined settings that determine the impact that the application has on the performance of the local computer in scenarios of information retrieval and interaction with the Central Node component.

Software requirements for installing Kaspersky Endpoint Agent 3.14 for Windows

Supported operating systems for workstations:

• Windows 7 SP1 Home / Professional / Enterprise / Ultimate 32-bit / 64-bit
• Windows 8.1.1 Professional / Enterprise 32-bit / 64-bit
• Windows 10 RS3 (version 1703) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 RS4 (version 1803) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 RS5 (version 1809) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 19H1 (version 1903) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 19H2 (version 1909) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 20H1 (version 2004) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 20H2 (version 2009) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 21H1 (version 21H1) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 10 21H2 (version 21H2) Home / Professional / Education / Enterprise 32-bit / 64-bit
• Windows 11 21H2 (version 21H2) Home / Professional / Education / Enterprise 32-bit / 64-bit

Supported server operating systems:

• Windows Server 2008 SP2 Standard / Enterprise 64-bit
• Windows Server 2008 R2 SP1 Foundation / Standard / Enterprise 64-bit
• Windows Server 2012 Foundation / Standard / Enterprise / Datacenter 64-bit
• Windows Server 2012 R2 Foundation / Standard / Enterprise / Datacenter 64-bit
• Windows Server 2016 Essentials / Standard / Datacenter 64-bit
• Windows Server 2019 Essentials / Standard / Datacenter 64-bit
• Windows Server 20H2 Standard Core / Datacenter Core 64-bit
• Windows Server 2022 Standard / Datacenter 64-bit

Supported embedded operating systems:

• Windows Embedded Standard 7 SP1 32-bit / 64-bit.

Software requirements for installing Kaspersky Endpoint Agent 3.14 for Windows when integrating with Kaspersky Industrial CyberSecurity for Nodes

Supported operating systems for workstations:

• Windows XP Professional SP2 32-bit / 64-bit.
• Windows XP Professional SP3 32-bit.
• Windows Vista SP2 32-bit / 64-bit.
• Windows 7 SP1 Home / Pro / Enterprise / Ultimate 32-bit / 64-bit.
• Windows 8 Pro / Enterprise 32-bit / 64-bit.
• Windows 8.1 Pro / Enterprise 32-bit / 64-bit.
• Windows 10 LTSC 2015 (1507) 32-bit / 64-bit.
• Windows 10 LTSC 2016 (1607) 32-bit / 64-bit.
• Windows 10 LTSC 2019 (1809) 32-bit / 64-bit.
• Windows 10 LTSC 2021 (21H2) 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 1703 RS2 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 1803 RS4 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 1809 RS5 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 1903 19H1 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 1909 19H2 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 2004 20H1 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 2009 20H2 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 21H1 32-bit / 64-bit.
• Windows 10 Home / Pro / Education / Enterprise 21H2 32-bit / 64-bit.

Supported server operating systems:

• Windows Server 2003 SP1 Standard / Enterprise / Datacenter 32-bit / 64-bit.
• Windows Server 2003 SP2 Standard / Enterprise / Datacenter 32-bit / 64-bit.
• Windows Server 2008 SP2 Standard / Enterprise / Datacenter 32-bit / 64-bit.
• Windows Server 2003 R2 Standard / Enterprise / Datacenter 32-bit / 64-bit.
• Windows Server 2008 R2 SP1 Standard / Enterprise / Datacenter 32-bit / 64-bit.
• Windows Server 2012 Foundation / Standard / Essentials / Datacenter 64-bit.
• Windows Server 2012 R2 Foundation / Standard / Enterprise / Datacenter 64-bit.
• Windows Server 2016 Essentials / Standard / Datacenter 64-bit, versions 1709 and 1803.
• Windows Server 2019 Standard Core / Datacenter Core 64-bit, versions 1903, 1909, 2004, 20H2, and 21H2.

Supported embedded operating systems:

• Windows XP Embedded SP2 (WEPOS) 32-bit / 64-bit.
• Windows XP Embedded SP3 (POSReady 2009) 32-bit.
• Windows 7 SP1 Embedded (POSReady 7) 32-bit / 64-bit.
• Windows Embedded 8.1 Industry Pro 32-bit / 64-bit.
• Windows 10 IoT Enterprise 32-bit / 64-bit versions 1703, 1803, 1809, 1903, 1909, 2004, 2009, 21H1, and 21H2.

When creating an installation package in Kaspersky Security Center version 12 or later to install Kaspersky Endpoint Agent on Windows XP devices, you must use the installer file (setup.exe) from the installation package created in Kaspersky Security Center version 10.5.

Hardware requirements for installing Kaspersky Endpoint Agent 3.14 for Windows

Minimum configuration:

• CPU: 1.4 GHz (single core) or higher.
• RAM: 256 MB (512 MB for a 64-bit operating system).
• Available disk space: 500 MB.
• One network adapter with a data transfer speed of 1 Gbit/s.

When integrated with Kaspersky Endpoint Security, the Kaspersky Anti Targeted Attack Platform has limited functionality if the Windows Server 2008 SP2 64-bit operating system is installed on the Kaspersky Endpoint Security server.

To manage Kaspersky Endpoint Agent using the Kaspersky Security Center Web Console, you need Google Chrome for Windows.

Compatibility of Kaspersky Endpoint Agent for Windows versions with Kaspersky Anti Targeted Attack Platform versions

Kaspersky Endpoint Agent uses predefined settings that determine the impact that it has on the performance of the local computer under scenarios of information retrieval and interaction with the Central Node component.

If the version of Kaspersky Anti Targeted Attack Platform installed on Central Node servers is incompatible with the version of Kaspersky Endpoint Agent installed on computers on the corporate LAN, the functionality of Kaspersky Anti Targeted Attack Platform may be limited.

Information about the compatibility of Kaspersky Endpoint Agent component versions with Kaspersky Anti Targeted Attack Platform versions is listed in the table below.

Compatibility of Kaspersky Endpoint Agent for Windows versions with Kaspersky Anti Targeted Attack Platform versions

Version Kaspersky Endpoint Agent	Type Kaspersky Endpoint Agent	Compatibility with KATA 3.7	Compatibility with KATA 3.7.1	Compatibility with KATA 3.7.2	Compatibility with KATA 4.0	Compatibility with KATA 4.1	Compatibility with KATA 5.0
Endpoint Agent 3.7	Standalone installation or as part of KES versions 11.2 and 11.3	No	No	No	No	No	No
Endpoint Agent 3.8	Standalone installation	Yes	Yes	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: AMSI scan event data not available. The amount of data sent by Kaspersky Endpoint Agent for Module loaded, File changed, Registry modified, Process: console interactive input events is limited. Details of the scope of data for these events are described in the Kaspersky Anti Targeted Attack Platform Help for version 3.7.1. The Get list of files and processes task is not supported.	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: Event information does not display the OS name and OS name fields. The amount of data sent by Kaspersky Endpoint Agent for Module loaded, File changed, Registry modified, Process: console interactive input, and Connection to remote host events is limited. Details of the scope of data for these events are described in the Kaspersky Anti Targeted Attack Platform Help for version 3.7.1. AMSI scan event data not available. The tasks Collect data, Start YARA scan, Service management are not supported.	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: Event information does not display the OS name and OS name fields. The amount of data sent by Kaspersky Endpoint Agent for Module loaded, File changed, Registry modified, Process: console interactive input, and Connection to remote host events is limited. Details of the scope of data for these events are described in the Kaspersky Anti Targeted Attack Platform Help for version 3.7.1. AMSI scan event data not available. Details of the scope of data for these events are described in the Kaspersky Anti Targeted Attack Platform version 3.7.2 Help. The tasks Collect data, Start YARA scan, Service management, Get NTFS metafiles, Get process memory dump, Get registry key are not supported. For detailed information about these tasks, refer to Kaspersky Anti Targeted Attack Platform version 4.0 Help.	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: AMSI scan event data not available. The amount of data sent by Kaspersky Endpoint Agent is limited for the events: Module loaded, File changed (File created), Registry modified, Process: console interactive input. Details of the scope of data for these events are described in the Kaspersky Anti Targeted Attack Platform version 3.7.1 Help. OS name, OS name, and Host IP are not displayed in information about events. The tasks Start YARA scan, Service management, Get forensics, Get NTFS metafiles, Get process memory dump, Get registry key, Get disk image, Get memory dump are not supported.
Endpoint Agent 3.9	Standalone installation or as part of EPP applications	Yes	Yes	There are limitations	There are limitations	There are limitations	There are limitations
Endpoint Agent 3.10	Standalone installation or as part of EPP applications	No	There are limitations The server of this version of Kaspersky Anti Targeted Attack Platform accepts a limited amount of data from the Kaspersky Endpoint Agent application for Module loaded, File changed, Registry modified, Process: console interactive input events. Details of the scope of data for these events are described in the Kaspersky Anti Targeted Attack Platform version 3.7.1 Help.	Yes	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: The Host IP is not displayed in information about events. Getting an autorun points list using the Get forensics task is not supported. The tasks Start YARA scan and Service management are not supported.	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: The Host IP is not displayed in information about events. Getting a list of autorun points using the Collect data task is not supported. The tasks Start YARA scan, Service management, Get NTFS metafiles, Get process memory dump, Get registry key are not supported.	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: The Host IP is not displayed in information about events. Getting a list of autorun points using the Collect data task is not supported. The tasks Start YARA scan, Service management, Get NTFS metafiles, Get process memory dump, Get registry key, Get disk image, Get memory dump are not supported.
Endpoint Agent 3.11	Standalone installation or as part of KES version 11.7	No	There are limitations	Yes	There are limitations	There are limitations	There are limitations
Endpoint Agent 3.12	Standalone installation	No	No	No	Yes	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: Scanning autorun points using the Start YARA scan task is not supported. The tasks Get NTFS metafiles, Get process memory dump, Get registry key are not supported.	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: Scanning autorun points using the Start YARA scan task is not supported. The tasks Get NTFS metafiles, Get process memory dump, Get registry key, Get disk image, Get memory dump are not supported.
Endpoint Agent 3.13	Standalone installation	No	No	No	There are limitations The server of this Kaspersky Anti Targeted Attack Platform version receives a limited scope of data from the Kaspersky Endpoint Agent program: You cannot create the tasks Get NTFS metafiles, Get process memory dump, Get registry key in the web interface of the program.	Yes	There are limitations The amount of data sent by Kaspersky Endpoint Agent is limited: The tasks Get disk image and Get memory dump are not supported.
Endpoint Agent 3.14	Standalone installation	No	No	No	There are limitations The server of this Kaspersky Anti Targeted Attack Platform version can receive a limited scope of data from the Kaspersky Endpoint Agent program: the tasks Get NTFS metafiles, Get process memory dump, Get registry key, Get disk image, Get memory dump cannot be created in the web interface of the program.	There are limitations A server of this Kaspersky Anti Targeted Attack Platform version receives a limited scope of data from the Kaspersky Endpoint Agent program: the tasks Get disk image and Get memory dump cannot be created in the web interface of the program.	Yes

Page top

Compatibility of Kaspersky Endpoint Agent for Windows versions with EPP applications

You can use Kaspersky Endpoint Agent alone or set up an integration of Kaspersky Endpoint Agent with workstation protection programs (Endpoint Protection Platform, hereinafter also "EPP"), Kaspersky Endpoint Security for Windows, Kaspersky Security for Windows Server, and Kaspersky Security for Virtualization Light Agent. If the integration of programs is configured, Kaspersky Endpoint Agent also sends the information about threats detected by EPP programs and their processing results to the Central Node server.

The integration scenarios described above do not work when Kaspersky Endpoint Agent is installed on a virtual desktop in Virtual Desktop Infrastructure.

Integration of Kaspersky Endpoint Agent with Kaspersky Endpoint Security for Windows and Kaspersky Security for Windows Server requires installing Kaspersky Endpoint Agent as part of those programs.

Compatibility of Kaspersky Endpoint Agent for Windows with versions of Kaspersky Security for Windows Server

You can install the following versions of Kaspersky Endpoint Agent as part of Kaspersky Security for Windows Server:

• Kaspersky Endpoint Agent 3.9 as part of Kaspersky Security 11 for Windows Server.
• Kaspersky Endpoint Agent 3.10 as part of Kaspersky Security 11.0.1 for Windows Server.

When you install Kaspersky Endpoint Agent as part of Kaspersky Security for Windows Server, the standalone Kaspersky Endpoint Agent of the same or earlier version is removed. If Kaspersky Endpoint Agent installed as part of Kaspersky Security for Windows Server has an earlier version, it will not be installed. In this case, you must first remove the standalone Kaspersky Endpoint Agent.

If necessary, you can upgrade the Kaspersky Endpoint Agent that is already installed as part of Kaspersky Security for Windows Server. Integration between compatible versions of the programs is maintained both when Kaspersky Endpoint Agent is upgraded and when Kaspersky Security for Windows Server is upgraded.

Information about the compatibility of Kaspersky Endpoint Agent versions with Kaspersky Security for Windows Server versions is listed in the table below.

Compatibility of Kaspersky Endpoint Agent versions with Kaspersky Security for Windows Server versions

For more details about installing Kaspersky Security for Windows Server, see Kaspersky Security for Windows Server Help.

Compatibility of Kaspersky Endpoint Agent for Windows with versions of Kaspersky Endpoint Security for Windows

You can install the following versions of Kaspersky Endpoint Agent (Endpoint Sensors) as part of Kaspersky Endpoint Security for Windows:

• Kaspersky Endpoint Agent 3.7 or Kaspersky Endpoint Agent (Endpoint Sensors) 3.6.1 as part of Kaspersky Endpoint Security 11.2, 11.3 for Windows.

  Kaspersky Endpoint Agent (Endpoint Sensors) 3.6.1 is not compatible with Kaspersky Anti Targeted Attack Platform version 4.1 or later.

  Kaspersky Endpoint Agent 3.7 is incompatible with all versions of Kaspersky Anti Targeted Attack Platform.

• Kaspersky Endpoint Agent 3.9 as part of Kaspersky Endpoint Security 11.4, 11.5.
• Kaspersky Endpoint Agent 3.10 as part of Kaspersky Endpoint Security 11.6.
• Kaspersky Endpoint Agent 3.11 as part of Kaspersky Endpoint Security 11.7, 11.8.

When you install Kaspersky Endpoint Agent 3.10 or later as part of Kaspersky Endpoint Security for Windows, the standalone Kaspersky Endpoint Agent program of the same or earlier version is removed. If the separately installed Kaspersky Endpoint Agent has a later version, the program bundled with Kaspersky Endpoint Security for Windows is not installed. In this case, you must first remove the standalone Kaspersky Endpoint Agent.

If necessary, you can upgrade the Kaspersky Endpoint Agent that is already installed as part of Kaspersky Endpoint Security for Windows. Integration between compatible versions of the programs is maintained when both Kaspersky Endpoint Agent is updated and when Kaspersky Endpoint Security for Windows is updated. You can upgrade a previous version of Kaspersky Endpoint Agent to version 3.14 only for Kaspersky Endpoint Agent version 3.7 or later.

Information about the compatibility of Kaspersky Endpoint Agent versions with Kaspersky Endpoint Security for Windows versions is listed in the table below.

Compatibility of Kaspersky Endpoint Agent versions with Kaspersky Endpoint Security for Windows versions

For more details about installing Kaspersky Endpoint Security, see Kaspersky Endpoint Security for Windows Help.

Compatibility of Kaspersky Endpoint Agent with versions of Kaspersky Security for Virtualization Light Agent

You can configure the integration of separately installed Kaspersky Endpoint Agent and Kaspersky Security for Virtualization Light Agent.

Information about the compatibility of Kaspersky Endpoint Agent versions with Kaspersky Security for Virtualization Light Agent is listed in the table below.

Compatibility of Kaspersky Endpoint Agent versions and Kaspersky Security for Virtualization Light Agent versions

Kaspersky Endpoint Agent and Kaspersky Security for Virtualization Light Agent installed on a virtual machine generate the same load on the Central Node server as Kaspersky Endpoint Agent and Kaspersky Security for Virtualization Light Agent installed on the host.

For more details about enabling the integration of Kaspersky Endpoint Agent with Kaspersky Security for Virtualization Light Agent, see Kaspersky Security for Virtualization Light Agent Help.

Compatibility of Kaspersky Endpoint Agent with versions of Kaspersky Industrial CyberSecurity for Nodes

You can install Kaspersky Endpoint Agent on a device with Kaspersky Industrial CyberSecurity for Nodes installed. The applications are integrated automatically.

Integration is supported only for Kaspersky Endpoint Agent version 3.14 and Kaspersky Industrial CyberSecurity for Nodes version 3.1. Integration between other versions of the programs is not supported.

To integrate with Kaspersky Industrial CyberSecurity for Nodes, the corresponding license key must be installed in the Kaspersky Endpoint Agent.

For detailed information, you can contact your account manager.

Compatibility of Kaspersky Endpoint Agent for Windows versions with other applications

Kaspersky Anti Targeted Attack Platform does not support joint operation with programs not listed in this section.

Compatibility of Kaspersky Endpoint Agent 3.8 and 3.9 for Windows with other Kaspersky programs

Kaspersky Endpoint Agent program versions 3.8 and 3.9 are compatible with the following Kaspersky programs and solutions:

• Kaspersky Security Center 11, 12, or later.
• Kaspersky Sandbox 1.0.

Compatibility of Kaspersky Endpoint Agent 3.8 and 3.9 for Windows with third-party anti-virus programs

One of the following third-party anti-virus programs can be installed on computers on which you want to install Kaspersky Endpoint Agent:

• Symantec Endpoint Protection.
• Sophos Endpoint Protection.
• ESET NOD32 Business Edition Smart Security.
• Bitdefender GravityZone Advanced Business Security.
• McAfee Endpoint Security 10.6.1.
• McAfee Endpoint Security 10.7.

If multiple third-party anti-virus programs are simultaneously installed on the computer, correct operation of Kaspersky Endpoint Agent is not guaranteed.

If RealTimes Desktop Service is installed on computers on which you want to install Kaspersky Endpoint Agent, you are advised to remove it before installing Kaspersky Endpoint Agent.

Compatibility of Kaspersky Endpoint Agent for Windows version 3.10 with other Kaspersky programs

Kaspersky Endpoint Agent version 3.10 can be integrated with the following Kaspersky programs and solutions:

• Kaspersky Security Center versions 11 and 12.1.
• Kaspersky Sandbox 1.0.
• Kaspersky Endpoint Detection and Response Optimum 1.0.

Compatibility of Kaspersky Endpoint Agent 3.10 for Windows with third-party anti-virus programs

Computers on which you want to install Kaspersky Endpoint Agent 3.10 can have Bitdefender GravityZone Advanced Business Security installed.

Compatibility of Kaspersky Endpoint Agent for Windows version 3.11 with other Kaspersky programs

Kaspersky Endpoint Agent version 3.11 can be integrated with the following Kaspersky programs and solutions:

• Kaspersky Security Center 10.5, 11, 12.1, 13, or later.
• Kaspersky Sandbox 1.0.
• Kaspersky Endpoint Detection and Response Optimum 1.0.
• Kaspersky Industrial CyberSecurity for Networks 3.0.

Compatibility of Kaspersky Endpoint Agent 3.11 for Windows with third-party anti-virus programs

Computers on which you want to install Kaspersky Endpoint Agent 3.11 can have Bitdefender GravityZone Advanced Business Security installed.

Compatibility of Kaspersky Endpoint Agent 3.12 for Windows with other Kaspersky programs

Kaspersky Endpoint Agent 3.12 can be integrated with the following Kaspersky programs and solutions:

• Kaspersky Security Center versions 13, 13.1, and 13.2.
• Kaspersky Security Center Cloud Console.
• Kaspersky Sandbox 1.0.
• Kaspersky Endpoint Detection and Response Optimum 1.0.

Compatibility of Kaspersky Endpoint Agent for Windows versions 3.13 and 3.14 with other Kaspersky programs

Kaspersky Endpoint Agent versions 3.13 and 3.14 can be integrated with the following Kaspersky programs and solutions:

• Kaspersky Security Center versions 13, 13.1, 13.2, and 14.
• Kaspersky Sandbox 2.0.
• Kaspersky Endpoint Detection and Response Optimum 1.0.

Requirements for Kaspersky Endpoint Agent for Linux

This section describes hardware and software requirements of Kaspersky Endpoint Agent 3.12 for Linux.

Software requirements for installing Kaspersky Endpoint Agent 3.12 for Linux

Kaspersky Endpoint Agent 3.12 only works on computers that have one of the following operating systems installed:

• Ubuntu 16.04 LTS or later
• Ubuntu 18.04 LTS or later
• Ubuntu 20.04 LTS
• Red Hat Enterprise Linux 7.2 or later
• Red Hat Enterprise Linux 8.0 or later
• CentOS 7.2 or later
• CentOS 8.0 or later
• Debian GNU / Linux 9.4 or later
• Debian GNU / Linux 10.1 or later
• Debian GNU / Linux 11 or later
• Oracle Linux 7.3 or later
• Oracle Linux 8 or later
• SUSE Linux Enterprise Server 12 or later
• SUSE Linux Enterprise Server 15
• Astra Linux Special Edition RUSB.10015-01 (regular update 1.6)
• Astra Linux Special Edition RUSB.10015-01 (regular update 1.7)
• Astra Linux Special Edition RUSB.10015-16 (variant 1) (regular update 1.6)
• Astra Linux Common Edition (regular update 2.12)
• Alt 8 SP Server
• Alt Server 9
• Alt Workstation 9
• Goslinux 7.17
• RED OS 7.3

Hardware requirements for installing Kaspersky Endpoint Agent 3.12 for Linux

Minimum hardware requirements:

• CPU: 2 GHz.
• RAM: 512 MB.
• Available disk space: 1 GB.

Required software

Kaspersky Endpoint Agent for Linux requires Linux Audit Daemon 2.8 or later. Installed on hosts with Kaspersky Endpoint Agent.

Compatibility of Kaspersky Endpoint Agent 3.12 for Linux with Kaspersky EPP programs

Kaspersky Endpoint Agent 3.12 supports integration with Kaspersky Endpoint Security for Linux 11.1, 11.2.

Compatibility of Kaspersky Endpoint Agent 3.12 for Linux with other Kaspersky programs

Kaspersky Endpoint Agent 3.12 can be integrated with the following Kaspersky programs and solutions:

• Kaspersky Security Center 13, 13.2.
• Kaspersky Endpoint Agent administration plug-in 3.10, 3.11, 3.12.
• Kaspersky Endpoint Agent web plug-in 3.10, 3.11, 3.12.

Compatibility of Kaspersky Endpoint Agent for Linux versions with Kaspersky Anti Targeted Attack Platform versions

Information about the compatibility of Kaspersky Endpoint Agent program versions with Kaspersky Anti Targeted Attack Platform versions is listed in the table below.

Compatibility of Kaspersky Endpoint Agent for Linux versions with Kaspersky Anti Targeted Attack Platform versions

Page top

Compatibility of Kaspersky Endpoint Agent for Linux versions with EPP applications

You can use Kaspersky Endpoint Agent alone or configure the integration of Kaspersky Endpoint Agent with the workstation protection program (Endpoint Protection Platform, hereinafter also called EPP) Kaspersky Endpoint Security for Linux. If the integration is configured, Kaspersky Endpoint Agent also sends the information about threats detected by this program and the results of threat processing to the Central Node server.

Kaspersky Endpoint Agent 3.9 and 3.12 are compatible with the following versions of Kaspersky Endpoint Security for Linux: 11.1, 11.2.

For more details about installing Kaspersky Endpoint Security, see Kaspersky Endpoint Security for Linux Help.

Compatibility of Kaspersky Endpoint Agent for Linux versions with other applications

Compatibility of Kaspersky Endpoint Agent 3.9 for Linux with other Kaspersky programs

Kaspersky Endpoint Agent 3.9 can be integrated with the following Kaspersky programs and solutions:

• Kaspersky Security Center versions 12.1 and 12.2.
• Kaspersky Endpoint Agent administration plug-in 3.10.
• Kaspersky Endpoint Agent web plug-in 3.10.

Compatibility of Kaspersky Endpoint Agent 3.12 for Linux with other Kaspersky programs

Kaspersky Endpoint Agent 3.12 can be integrated with the following Kaspersky programs and solutions:

• Kaspersky Security Center 13, 13.2.
• Kaspersky Endpoint Agent administration plug-in 3.10, 3.11, 3.12.
• Kaspersky Endpoint Agent web plug-in 3.10, 3.11, 3.12.

Compatibility of Kaspersky Endpoint Security for Windows versions with Kaspersky Anti Targeted Attack Platform versions

You can use Kaspersky Endpoint Security as the Endpoint Agent component.

Information about the compatibility of Kaspersky Endpoint Security versions with Kaspersky Anti Targeted Attack Platform versions is listed in the table below.

Compatibility of Kaspersky Endpoint Security for Windows versions with Kaspersky Anti Targeted Attack Platform versions

To integrate Kaspersky Endpoint Security 12.1 with Kaspersky Anti Targeted Attack Platform, you do not need to install Kaspersky Endpoint Agent.