Kaspersky Anti Targeted Attack Platform
5.0
English

Contents

Configuring the SNMP protocol connection

You can send information about the CPU and RAM load on Central Node and Sensor servers to external systems that support the SNMP protocol. To do so, you must configure the connection for the protocol.

If the Central Node component is deployed as a cluster, data about the CPU and RAM load of each server in the cluster is sent to external systems.

To configure the SNMP protocol connection on the Central Node server:

  1. In the window of the program web interface, select the Settings section, General settings subsection.
  2. Under SNMP, select the Use SNMP check box.
  3. In the Protocol version field, select a protocol version:
    • v2c.
    • v3.
  4. If you selected the v2c protocol version, in the Community string field, enter the password that will be used for connecting to Kaspersky Anti Targeted Attack Platform.
  5. If you selected v3:
    1. In the Authentication protocol field, select one of the following options for checking the accuracy and integrity of data sent to the external system:
      • MD5.
      • SHA256.
    2. In the User name field, enter the user name.
    3. In the Password field, enter the password for authentication.

      User name and password configured in the User name and Password fields must match the user name and password configured when creating the account in the external system. If the credentials do not match, the connection cannot be established.

    4. In the Privacy protocol field, select an encryption type:
      • DES.
      • AES.
    5. In the Password field, enter the encryption password.

      The password configured in this field must match the password configured in the external system.

Protocol connection on the Central Node server is configured. If the request for data is successfully processed, the server of the external system displays information about CPU and RAM load of the Central Node server.

To configure the SNMP protocol connection on the Sensor server:

  1. Enter the management console of the Sensor server via the SSH protocol or through a terminal.
  2. When the system prompts you, enter the administrator user name and the password that was specified during installation of the program.

    The program component administrator menu is displayed.

  3. Follow steps 2 through 5 of the instructions above.

Protocol connection on the Sensor server is configured. If the request is successfully processed, the server of the external system displays information about CPU and RAM load of the Sensor server.

In

distributed solution
and
multitenancy mode
, SNMP connection settings for each PCN, SCN, and Sensor server must be configured separately.

In this section

Description of MIB objects of Kaspersky Anti Targeted Attack Platform
Page top
[Topic 226682]

Description of MIB objects of Kaspersky Anti Targeted Attack Platform

The tables below provide information about

MIB
objects of Kaspersky Anti Targeted Attack Platform.

Information about hard drive, CPU, and RAM load of Central Node and Sensor servers

Information about hard drive, CPU, and RAM load of Central Node and Sensor servers

Symbolic name

Description

Object identifier (OID)

dskTotal

Total size of the disk or partition, KB.

1.3.6.1.4.1.2021.9.1.6

dskAvail

Available space on the disk, KB.

1.3.6.1.4.1.2021.9.1.7

dskUsed

Used space on the disk, KB.

1.3.6.1.4.1.2021.9.1.8

dskPercent

Percentage of space used on disk, %.

1.3.6.1.4.1.2021.9.1.9

laLoad

System load average for 1, 5 and 15 minutes.

1.3.6.1.4.1.2021.10.1.3

memTotalReal

Total RAM size, KB.

1.3.6.1.4.1.2021.4.5

memAvailReal

Total RAM used, KB.

1.3.6.1.4.1.2021.4.6

memTotalFree

Total RAM free, KB.

1.3.6.1.4.1.2021.4.11

Page top

[Topic 233730]