Kaspersky Embedded Systems Security 3.4 for Linux Help

Kaspersky Embedded Systems Security for Linux

Print Support Send link

Malware Scan in the Administration Console

Malware Scan in the Administration Console

In the Administration Console, you can scan for malware using the Malware Scan task.

You can run an automatically created group task and also create and run user tasks for scanning. You can configure scan settings by editing the settings of Malware Scan tasks.

In the Settings section of the properties of the Malware Scan task, you can configure the settings listed in the table below.

Malware Scan task settings

Setting	Description
Scan	This group of settings contains buttons that open windows where you can configure the scan scopes, scan scope settings, and scan settings.
Action on threat detection	This group of settings contains the Configure button. Clicking this button opens the Action on threat detection window, where you can configure the actions that the application performs on detected infected objects.

In the Exclusions section, you can configure exclusion scopes as well as exclusions by mask and by the threat name in the properties of the Malware Scan task.

In this section

Scan scopes window

<New scan scope> window

Scan scope settings window

Scan scopes window

Scan settings window

Action on threat detection window

Exclusions section

Exclusion scopes window

<New exclusion scope> window

Exclusions by mask window

Exclusions by threat name window

Page top

Scan scopes window

The table contains the scan scopes. The application will scan files and directories located in the paths specified in the table. By default, the table contains one scan scope that includes all directories of the local file system.

Scan scope settings

Setting	Description
Scope name	Scan scope name.
Path	Path to the directory that the application scans.
Status	The status indicates whether the application scans this scope.

You can add, edit, delete, move up, and move down items in the table.

Clicking the Move down button moves the selected item down in the table.

Kaspersky Embedded Systems Security scans objects in the specified scopes in the order they are listed in the table of scan scopes. If you want to configure security settings for a subdirectory that are different from the security settings of the parent directory, you must place the subdirectory higher than its parent directory in the table.

This button is available if a scope is selected in the table.

Clicking the Move up button moves the selected item up in the table.

This button is available if a scope is selected in the table.

Clicking the Delete button excludes the selected scope from scans.

This button is available if at least one scan scope is selected in the table.

The selected element's settings are changed in a separate window.

Clicking the Add button opens a window where you can specify the new item settings.

Kaspersky Embedded Systems Security scans objects in the specified scopes in the order they appear in the list of scopes. If necessary, place the subdirectory higher in the list than its parent directory, to configure security settings for a subdirectory that are different from the security settings of the parent directory.

Page top

<New scan scope> window

In this window, you can add and configure scan scopes.

Scan scope settings

Setting	Description
Scan scope name	Field for entering the scan scope name. This name will be displayed in the table in the Scan scopes window. The entry field must not be blank.
Use this scope	This check box enables or disables scans of this scope by the application. If this check box is selected, the application processes this scan scope. If this check box is cleared, the application does not process this scan scope. You can later include this scope in the component settings by selecting the check box. The check box is selected by default.
File system, access protocol, and path	The settings block lets you set the scan scope. You can select the file system type in the drop-down list of file systems: Local (default value) – local directories. If this item is selected, you need to indicate the path to the local directory. Mounted – Mounted remote or local directories. If this item is selected, you need to indicate the protocol or name of the file system. Shared — The protected server's file system resources accessible via the Samba or NFS protocol. All remote mounted – all remote directories mounted on the device using the Samba and NFS protocols. All shared — All of the protected server's file system resources accessible via the Samba and NFS protocols.
	If Shared or Mounted is selected in the drop-down list of file systems, you can select the remote access protocol in the drop-down list on the right: NFS: remote directories mounted on a device using the NFS protocol. Samba: remote directories mounted on a device using the Samba protocol. Custom – resources of the device's file system specified in the field below.
	If Local is selected in the drop-down list of file systems, then in the input field you can enter a path to a directory that you want to add to the scan scope. You can use masks to specify the path. You can use the `` (asterisk) character to create a file or directory name mask. You can indicate a single `` character to represent any set of characters (including an empty set) preceding the `/` character in the file or directory name. For example, `/dir//file` or `/dir///file`. You can indicate two consecutive `` characters to represent any set of characters (including an empty set and the `/` character) in the file or directory name. For example, `/dir/*/file/` or `/dir/file/`. The `` mask can be used only once in a directory name. For example, `/dir///file` is an incorrect mask. You can use a single `?` character to represent any one character in the file or directory name. The / path is specified by default – the application scans all directories of the local file system. If the Local type is selected in the drop-down list of file systems, and the path is not specified, the application scans all directories of the local file system.
Filesystem name	The field for entering the name of the file system where the directories that you want to add to the scan scope are located. The field is available if the Mounted type is selected in the drop-down list of file systems and the Custom item is selected in the drop-down list on the right.
Masks	The list contains name masks for the objects that the application scans. By default the list contains the * mask (all objects). You can add, edit, or delete masks. Clicking the Delete button removes the selected item from the table. This button is available if at least one item is selected in the table. The selected element's settings are changed in a separate window. Clicking the Add button opens a window where you can specify the new item settings.

Page top

Scan scope settings window

In this window, you can configure the scan settings for the Malware Scan task. The application allows you to scan files, boot sectors, device memory, and startup objects.

Scan scope settings

Setting	Description
Scan files	This check box enables or disables file scans. If the check box is selected, the application scans the files. If the check box is cleared, the application does not scan the files. The check box is selected by default.
Scan boot sectors	This check box enables or disables boot sector scans. If the check box is selected, the application scans the boot sectors. If the check box is cleared, the application does not scan the boot sectors. This check box is cleared by default.
Scan kernel memory and running processes	This check box enables or disables device memory scan. If the check box is selected, the application scans kernel memory and running processes. If the check box is cleared, the application does not scan kernel memory and running processes. This check box is cleared by default.
Scan startup objects	This check box enables or disables startup object scans. If the check box is selected, the application scans startup objects. If the check box is cleared, the application does not scan startup objects. This check box is cleared by default.
Devices to scan	This group of settings contains the Configure button. Clicking this button opens the Scan scopes window, where you can specify the devices whose boot sectors must be scanned.
Use global exclusions	The check box enables or disables the exclusion of the mount points specified in global exceptions while the application is running. If this check box is selected, the application excludes configured mount points from scans. The check box is selected by default.
Use File Threat Protection exclusions	This check box enables or disables the use of configured File Threat Protection exclusions when the application is running. If the check box is selected, the application does not scan the objects specified in the exclusions for the File Threat Protection component. The check box is selected by default.

Page top

Scan scopes window

The table contains name masks of the devices, whose boot sectors the application must scan. By default, the table contains the /** device name mask (all devices).

You can add, edit, and delete items in the table.

Clicking the Delete button excludes the selected scope from scans.

This button is available if at least one scan scope is selected in the table.

The selected element's settings are changed in a separate window.

Clicking the Add button opens a window where you can specify the new item settings.

Page top

Scan settings window

In this window, you can configure the file scan settings for the task.

Scan settings

Setting	Description
Scan archives	This check box enables or disables scan of archives. If the check box is selected, the application scans the archives. To scan an archive, the application has to unpack it first, which may slow down scanning. You can reduce the duration of archive scans by configuring the Skip file that is scanned for longer than (sec) and Skip file larger than (MB) settings in the General scan settings section. If the check box is cleared, the application does not scan the archives. The check box is selected by default.
Scan SFX archives	This check box enables or disables self-extracting archive scans. Self-extracting archives are the archives that contain an executable extraction module. If the check box is selected, the application scans self-extracting archives. If the check box is cleared, the application does not scan self-extracting archives. This check box is available if the Scan archives check box is unchecked. The check box is selected by default.
Scan mail databases	This check box enables or disables scans of mail databases of Microsoft Outlook, Outlook Express, The Bat!, and other mail applications. If the check box is selected, the application scans mail database files. If the check box is cleared, the application does not scan mail database files. This check box is cleared by default.
Scan mail format files	This check box enables or disables scan of files of plain-text email messages. If this check box is selected, the application scans plain-text messages. If this check box is cleared, the application does not scan plain-text messages. This check box is cleared by default.
Skip file that is scanned for longer than (sec)	In this field, you can specify the maximum time to scan a file, in seconds. After the specified time, the application stops scanning the file. Available values: 0–9999. If the value is set to 0, the scan time is unlimited. Default value: 0.
Skip file larger than (MB)	In this field, you can specify the maximum size of a file to scan, in megabytes. Available values: 0–999999. If the value is set to 0, the application scans files of any size. Default value: 0.
Log clean objects	This check box enables or disables the logging of ObjectProcessed type events. If this check box is selected, the application logs events of the ObjectProcessed type for all scanned objects. If this check box is cleared, the application does not log events of the ObjectProcessed type for any scanned object. This check box is cleared by default.
Log unprocessed objects	This check box enables or disables the logging ObjectNotProcessed type events if a file cannot be processed during a scan. If this check box is selected, the application logs the events of the ObjectNotProcessed type. If this check box is cleared, the application does not log the events of the ObjectNotProcessed type. This check box is cleared by default.
Log packed objects	This check box enables or disables the logging of PackedObjectDetected type events for all packed objects that are detected. If this check box is selected, the application logs the events of the PackedObjectDetected type. If this check box is cleared, the application does not log the events of the PackedObjectDetected type. This check box is cleared by default.
Use iChecker technology	This check box enables or disables scan of only new and modified since the last scan files. If the check box is selected, the application scans only new files or the files modified since the last scan. If the check box is cleared, the application scans the files regardless of the creation or modification date. The check box is selected by default.
Use heuristic analysis	This check box enables or disables heuristic analysis during file scans. The check box is selected by default.
Heuristic analysis level	If the Use heuristic analysis check box is selected, you can select the heuristic analysis level in the drop-down list: Light is the least detailed scan with minimal system load. Medium is a medium scan with balanced system load. Deep is the most detailed scan with maximum system load. Recommended (default value) is the optimal level recommended by Kaspersky experts. It ensures an optimal combination of protection quality and impact on the performance of the protected devices.

Page top

Action on threat detection window

In this window, you can configure actions to be performed by Kaspersky Embedded Systems Security on detected infected objects:

Actions on threat detection

Setting	Description
First action	In this drop-down list, you can select the first action to be performed by the application on an infected object that has been detected: Disinfect the object. A copy of the infected object will be moved to the Backup. Remove the object. A copy of the infected object will be moved to the Backup. Perform recommended action on the object, based on data about the danger level of the threat detected in the file and about the possibility of disinfecting it (default value). Skip the object.
Second action	In this drop-down list, you can select the second action to be performed by the application on an infected object, in case the first action is unsuccessful: Disinfect the object. A copy of the infected object will be moved to the Backup. Remove the object. A copy of the infected object will be moved to the Backup. Perform recommended action on the object, based on data about the danger level of the threat detected in the file and about the possibility of disinfecting it. Skip the object (default value).

Setting

Description

First action

In this drop-down list, you can select the first action to be performed by the application on an infected object that has been detected:

Disinfect the object. A copy of the infected object will be moved to the Backup.
Remove the object. A copy of the infected object will be moved to the Backup.
Perform recommended action on the object, based on data about the danger level of the threat detected in the file and about the possibility of disinfecting it (default value).
Skip the object.

Second action

In this drop-down list, you can select the second action to be performed by the application on an infected object, in case the first action is unsuccessful:

Disinfect the object. A copy of the infected object will be moved to the Backup.
Remove the object. A copy of the infected object will be moved to the Backup.
Perform recommended action on the object, based on data about the danger level of the threat detected in the file and about the possibility of disinfecting it.
Skip the object (default value).

Page top

Exclusions section

Scan exclusion is a set of conditions. When these conditions are met, Kaspersky Embedded Systems Security does not scan the objects for viruses and other malware. You can also exclude objects from scans by masks and threat names.

Settings of scan exclusions

Group of settings	Description
Exclusion scopes	This group of settings contains the Configure button. Clicking this button opens the Exclusion scopes window. In this window, you can define the list of scopes to be excluded from scans.
Exclusions by mask	This group of settings contains the Configure button, which opens the Exclusions by mask window. In this window, you can configure the exclusion of objects from scans by name mask.
Exclusions by threat name	This group of settings contains the Configure button, which opens the Exclusions by threat name window. In this window, you can configure the exclusion of objects from scans based on threat name.

Page top

Exclusion scopes window

This table contains scan exclusion scopes. The application does not scan files and directories located at the paths specified in the table. By default, the table is empty.

Exclusion scope settings

Setting	Description
Exclusion scope name	Exclusion scope name.
Path	Path to the directory excluded from scan.
Status	The status indicates whether the application uses this exclusion.

You can add, edit, and delete items in the table.

Clicking the Delete button excludes the selected scope from scans.

This button is available if at least one scan scope is selected in the table.

The selected element's settings are changed in a separate window.

Clicking the Add button opens a window where you can specify the new item settings.

Page top

<New exclusion scope> window

In this window, you can add and configure scan exclusion scopes.

Exclusion scope settings

Setting

Description

Exclusion scope name

Field for entering the exclusion scope name. This name will be displayed in the table in the Exclusion scopes window.

The entry field must not be blank.

Use this scope

The check box enables or disables exclusion of the scope from scan when the application is running.

If this check box is selected, the application excludes this area during scans.

If this check box is cleared, the application includes this area in the scan scope. You can later exclude this scope by selecting the check box.

The check box is selected by default.

File system, access protocol, and path

The settings block lets you set the exclusion scope.

In the drop-down list of file systems, you can select the type of file system of the directories to be excluded from scans:

Local, for local directories.
Mounted – mounted directories.
All remote mounted – all remote directories mounted on the device using the Samba and NFS protocols.

If Mounted is selected in the drop-down list of file systems, you can select the remote access protocol in the drop-down list on the right:

NFS: remote directories mounted on a device using the NFS protocol.
Samba: remote directories mounted on a device using the Samba protocol.
Custom – resources of the device's file system specified in the field below.

If Local is selected in the drop-down list of file systems, then in the input field you can enter a path to a directory that you want add to the exclusion scope. You can use masks to specify the path.

You can use the * (asterisk) character to create a file or directory name mask.

You can indicate a single * character to represent any set of characters (including an empty set) preceding the / character in the file or directory name. For example, /dir/*/file or /dir/*/*/file.

You can indicate two consecutive * characters to represent any set of characters (including an empty set and the / character) in the file or directory name. For example, /dir/**/file*/ or /dir/file**/.

The ** mask can be used only once in a directory name. For example, /dir/**/**/file is an incorrect mask.

To exclude the mount point /dir, you need to specifically indicate /dir (no asterisk).

The mask /dir/* excludes all mount points at the level below /dir but not /dir itself. The /dir/** mask excludes all mount points below the level of /dir but not /dir itself.

You can use a single ? character to represent any one character in the file or directory name.

The / path is specified by default. The application excludes all directories of the local file system from scan.

Filesystem name

The field for entering the name of the file system where the directories that you want to add to the exclusion scope are located.

The field is available if the Mounted type is selected in the drop-down list of file systems and the Custom item is selected in the drop-down list on the right.

Masks

The list contains name masks of the objects that the application excludes from scan. Masks are only applied to objects in the directory specified in the path field.

By default the list contains the * mask (all objects).

You can add, edit, or delete masks.

Clicking the Delete button causes Kaspersky Embedded Systems Security to remove the selected name mask of files excluded from a scan.

This button is available if at least one file mask is selected in the list.

Clicking the mask opens the Object mask window. In this window, in the Define object mask field, you can modify the name template for files that Kaspersky Embedded Systems Security excludes from scans.

Clicking the Add button opens the Object mask window. In this window, in the Define object mask field, you can specify the name template for files that Kaspersky Embedded Systems Security excludes from scans.

Examples:

The *.txt mask refers to all text files.

The *_my_file_??.html mask refers to html files starting with any characters, and ending with _my_file_ followed by any two characters (for example, 2020_my_file_09.html).

Page top

Exclusions by mask window

You can configure the exclusion of objects from scans based on name mask. The application will not scan files whose names contain the specified mask. By default, the list of masks is empty.

You can add, edit, or delete masks.

Clicking the Delete button causes Kaspersky Embedded Systems Security to remove the selected name mask of files excluded from a scan.

This button is available if at least one file mask is selected in the list.

Examples:

The *.txt mask refers to all text files.

The *_my_file_??.html mask refers to html files starting with any characters, and ending with _my_file_ followed by any two characters (for example, 2020_my_file_09.html).

Page top

Exclusions by threat name window

You can configure the exclusion of objects from scans based on threat name. The application will not block the specified threats. By default, the list of threat names is empty.

You can add, edit, and delete threat names.

Clicking the Delete button causes Kaspersky Embedded Systems Security to remove the selected threat from the exclusion list.

This button is available if at least one threat name is selected in the list.

Clicking the threat name in the table opens the Threat name window. In this window, you can edit the name of the threat to be excluded from a scan.

Clicking the Add button opens the Threat name window. In this window, you can define the name of the threat to be excluded from a scan.

Page top

Contents

Malware Scan in the Administration Console

Scan scopes window

<New scan scope> window

Scan scope settings window

Scan scopes window

Scan settings window

Action on threat detection window

Exclusions section

Exclusion scopes window

<New exclusion scope> window

Exclusions by mask window

Exclusions by threat name window