Kaspersky Embedded Systems Security for Linux
3.4.0
English

Contents

Configuring Anti-Cryptor in the Web Console

In the Web Console, you can configure Anti-Cryptor settings in the policy properties (Application settings → Advanced Threat Protection → Anti-Cryptor).

Anti-Cryptor component settings

Setting

Description

Anti-Cryptor protection enabled / disabled

This toggle switch enables or disables the protection of files in the local directories with network access by SMB/NFS protocols from remote malicious encrypting.

The toggle button is switched off by default.

Protection scopes

Clicking the Configure protection scopes link opens the Protection scopes window.

Action on encryption detection

The action to be performed by Kaspersky Embedded Systems Security upon detecting malicious encryption:

  • Inform user. Kaspersky Embedded Systems Security does not block the device performing encryption; it only records in the event log an event about the detection of malicious encryption.
  • Block the device performing encryption (default value).

Block untrusted host for (min)

In this field you can specify the untrusted host blocking duration in minutes.

If a compromised host is blocked and you change this setting value, the blocking time for this host will not change. The blocking time is not a dynamic value, and it is calculated at the moment of blocking.

Available values: integer from 1 to 4294967295.

Default value: 30.

Exclusions

Clicking the Configure exclusions link opens the Exclusion scopes window.

Exclusions by mask

Clicking the Configure exclusions by mask link opens the Exclusions by mask window.

Page top

[Topic 264159]

Protection scopes window

The table contains protection scopes of the Anti-Cryptor component. The application will scan files and directories located in the paths specified in the table. By default, the table contains one scan scope that includes all directories of the local file system.

Protection scope settings

Setting

Description

Scope name

Protection scope name.

Path

Path to the directory that the application protects.

Status

The status indicates whether the application scans this scope.

You can add, edit, delete, move up, and move down items in the table.

Clicking the Move down button moves the selected item down in the table.

This button is available if only one item is selected in the table.

Clicking the Move up button moves the selected item up in the table.

This button is available if only one item is selected in the table.

Clicking the Delete button removes the selected item from the table.

This button is available if at least one item is selected in the table.

The selected element's settings are changed in a separate window.

Clicking the Add button opens a window where you can specify the new item settings.

Kaspersky Embedded Systems Security protects objects in the specified scopes in the order they appear in the list of scopes. If necessary, place the subdirectory higher in the list than its parent directory, to configure security settings for a subdirectory that are different from the security settings of the parent directory.

Page top
[Topic 202352]

Add protection scope window

In this window, you can add or configure protection scope for the Anti-Cryptor component.

Protection scope settings

Setting

Description

Scope name

Field for entering the protection scope name. This name will be displayed in the table in the Protection scopes window.

The entry field must not be blank.

Use this scope

This check box enables or disables scans of this scope by the application.

If this check box is selected, the application processes this protection scope during the component operation.

If this check box is cleared, the application does not process this protection scope during the component operation. You can later include this scope in the component operation settings by selecting the check box.

The check box is selected by default.

File system, access protocol, and path

You can select the type of file system in the drop-down list:

  • Local (default value) – local directories.
  • Shared displays server file system resources accessible via the Samba or NFS protocol.
  • All shared displays all server file system resources accessible via the Samba and NFS protocols.

Access protocol

You can select the remote access protocol in the drop-down list:

  • NFS: remote directories mounted on a device using the NFS protocol.
  • Samba: remote directories mounted on a device using the Samba protocol.

This drop-down list is available if the Shared option is selected in the drop-down list of file systems.

Path

The entry field for specifying the path to the directory that you want to include in the protection scope. You can use masks to specify the path.

You can use the * (asterisk) character to create a file or directory name mask.

You can indicate a single * character to represent any set of characters (including an empty set) preceding the / character in the file or directory name. For example, /dir/*/file or /dir/*/*/file.

You can indicate two consecutive * characters to represent any set of characters (including an empty set and the / character) in the file or directory name. For example, /dir/**/file*/ or /dir/file**/.

The ** mask can be used only once in a directory name. For example, /dir/**/**/file is an incorrect mask.

You can use a single ? character to represent any one character in the file or directory name.

This field is available if the Local type is selected in the drop-down list of file systems.

The field must not be blank.

By default, the / path is specified (root directory).

Masks

This list contains name masks of the objects that the application scans during operation of the Anti-Cryptor component.

By default the list contains the * mask (all objects).

You can add, edit, or delete masks.

Clicking the Delete button removes the selected item from the table.

This button is available if at least one item is selected in the table.

The selected element's settings are changed in a separate window.

Clicking the Add button opens a window where you can specify the new item settings.

Page top

[Topic 202353]

Exclusion scopes window

This table contains scan exclusion scopes. The application does not scan files and directories located at the paths specified in the table. By default, the table is empty.

Exclusion scope settings

Setting

Description

Exclusion scope name

Exclusion scope name.

Path

Path to the directory excluded from scan.

Status

The status indicates whether the application uses this exclusion.

You can add, edit, and delete items in the table.

Clicking the Delete button excludes the selected scope from scans.

This button is available if at least one scan scope is selected in the table.

The selected element's settings are changed in a separate window.

Clicking the Add button opens a window where you can specify the new item settings.

Page top
[Topic 197613_3]

Add exclusion scope window

In this window, you can add and configure exclusion scopes.

Exclusion scope settings

Setting

Description

Exclusion scope name

Field for entering the exclusion scope name. This name will be displayed in the table in the Exclusion scopes window.

The entry field must not be blank.

Use this scope

This check box enables or disables the exclusion of the scope when the application is running.

If the check box is selected, the application excludes this scope from scan or protection during its operation.

If the check box is cleared, the application includes this scope in scan or protection during its operation. You can later exclude this scope from scan or protection by selecting the check box.

The check box is selected by default.

File system, access protocol, and path

In this drop-down list, you can select the type of file system where the directories that you want to add to scan exclusions are located:

  • Local, for local directories.
  • Mounted, for remote directories mounted on the device.
  • All remote mounted – all remote directories mounted on the device using the Samba and NFS protocols.

Access protocol

You can select the remote access protocol in the drop-down list:

  • NFS: remote directories mounted on a device using the NFS protocol.
  • Samba: remote directories mounted on a device using the Samba protocol.
  • Custom – resources of the device's file system specified in the field below.

This drop-down list is available if the Mounted type is selected in the drop-down list of file systems.

Path

Entry field for the path to the directory that you want to add to the exclusion scope. You can use masks to specify the path.

You can use the * (asterisk) character to create a file or directory name mask.

You can indicate a single * character to represent any set of characters (including an empty set) preceding the / character in the file or directory name. For example, /dir/*/file or /dir/*/*/file.

You can indicate two consecutive * characters to represent any set of characters (including an empty set and the / character) in the file or directory name. For example, /dir/**/file*/ or /dir/file**/.

The ** mask can be used only once in a directory name. For example, /dir/**/**/file is an incorrect mask.

To exclude the mount point /dir, you need to specifically indicate /dir (no asterisk).

The mask /dir/* excludes all mount points at the level below /dir but not /dir itself. The /dir/** mask excludes all mount points below the level of /dir but not /dir itself.

You can use a single ? character to represent any one character in the file or directory name.

The / path is specified by default. The application excludes all directories of the local file system from scan.

This field is available if the Local type is selected in the drop-down list of file systems.

Name of shared resource

The field for entering the name of the file system shared resource, where the directories that you want to add to the exclusion scope are located.

The field is available if the Mounted type is selected in the File system drop-down list and the Custom item is selected in the Access protocol drop-down list.

Masks

The list contains name masks of the objects that the application excludes from scan. Masks are only applied to objects in the directory specified in the Path field.

By default the list contains the * mask (all objects).

You can add, edit, or delete masks.

Clicking the Delete button causes Kaspersky Embedded Systems Security to remove the selected name mask of files excluded from a scan.

This button is available if at least one file mask is selected in the list.

Clicking the mask opens the Object mask window. In this window, in the Define object mask field, you can modify the name template for files that Kaspersky Embedded Systems Security excludes from scans.

Clicking the Add button opens the Object mask window. In this window, in the Define object mask field, you can specify the name template for files that Kaspersky Embedded Systems Security excludes from scans.

Examples:

The *.txt mask refers to all text files.

The *_my_file_??.html mask refers to html files starting with any characters, and ending with _my_file_ followed by any two characters (for example, 2020_my_file_09.html).

 

Page top

[Topic 248957_3]

Exclusions by mask window

You can configure the exclusion of objects from scans based on name mask. The application will not scan files whose names contain the specified mask. By default, the list of masks is empty.

You can add, edit, or delete masks.

Clicking the Delete button causes Kaspersky Embedded Systems Security to remove the selected name mask of files excluded from a scan.

This button is available if at least one file mask is selected in the list.

Clicking the mask opens the Object mask window. In this window, in the Define object mask field, you can modify the name template for files that Kaspersky Embedded Systems Security excludes from scans.

Clicking the Add button opens the Object mask window. In this window, in the Define object mask field, you can specify the name template for files that Kaspersky Embedded Systems Security excludes from scans.

Examples:

The *.txt mask refers to all text files.

The *_my_file_??.html mask refers to html files starting with any characters, and ending with _my_file_ followed by any two characters (for example, 2020_my_file_09.html).

Page top
[Topic 202356_3]