To open the list of license keys added to the Kaspersky Security Center key storage,

in the main window of Kaspersky Security Center Web Console, select the Operations → Licensing → Kaspersky Licenses.

The list is displayed as a table whose columns present information about the keys.

You can change the amount of displayed key information by configuring the display of table columns in the Column settings window. The window opens using the configuration button located above the table.

The table displays the following basic information about the key:

• License name – the name of the license associated with the key and information about this license.
• License Key – a license key, a unique alphanumeric sequence.
• Maximum number of devices – depends on the key type:
  • the maximum number of virtual machines that you can protect
  • the maximum number of physical processor cores used across all hypervisors whose virtual machines you can protect
  • the maximum number of physical processors used across all hypervisors whose virtual machines you can protect
• License type – trial, commercial, or subscription.
• License term (days) – the period in days during which you can use the solution activated by adding this key, for example, 365 days. This field is not displayed if you are using the solution under a subscription.
• License expiration date – the date when your right to use the solution activated by adding the current key expires. If the key was added on several SVMs at different times, this field shows the date for the SVM where the solution will expire soonest. If you are using the solution under an unlimited subscription, the field value is Unlimited.
• License key expiration date – key expiration date. You can activate the solution by adding this key and use the solution only before this expiration date. If you are using the solution under an unlimited subscription, the field value is Unlimited.
• Used as active – depends on the type of active key:
  • the number of protected virtual machines for which the key is used as the active key
  • the number of SVMs on which the key is added as an active key.
• Used as reserve – the number of SVMs on which the key is added as a reserve key. If you are using the solution under a subscription, the field value is Unavailable or 0.

For a subscription key, the table may also display the following information:

• Type of validity period restriction – if the solution is being used under an unlimited subscription, Unlimited is displayed in the field.
• Grace period – if the subscription has the "Grace period activated" status, the field shows the number of remaining days during which the solution will continue to perform all of its functions. If the subscription has any other status, the field shows 0.
• Link to service provider – web address of the service provider with whom the subscription is registered.
• Subscription status – current status of your subscription (active, paused, expired, canceled, grace period activated).

You can also view basic information about the license key added to the key storage in the key properties window. The key properties window opens by clicking on the link on the license name.

To open the list of license keys added to the Kaspersky Security Center key storage,

in the Kaspersky Security Center Administration Console tree, select the Kaspersky licenses folder.

The list is displayed as a table whose columns present information about the keys.

You can change the amount of displayed key information by configuring the display of table columns in the Add or remove columns window. The window opens via the Add or remove columns link located above the table.

The table displays the following basic information about the key:

• Application – the name of the license associated with the key and information about this license.
• Number – a license key, a unique alphanumeric sequence.
• Type – trial, commercial, or subscription.
• Restriction – depends on the key type:
  • the maximum number of virtual machines that you can protect
  • the maximum number of physical processor cores used across all hypervisors whose virtual machines you can protect
  • the maximum number of physical processors used across all hypervisors whose virtual machines you can protect
• License term (days) – the period in days during which you can use the solution activated by adding this key, for example, 365 days. This field is not displayed if you are using the solution under a subscription.
• License key expiration date – key expiration date. You can activate the solution by adding this key and use the solution only before this expiration date. If you are using the solution under an unlimited subscription, the field value is Unlimited.
• License expiration date – the date when your right to use the solution activated by adding the current key expires. If the key was added on several SVMs at different times, this field shows the date for the SVM where the solution will expire soonest. If you are using the solution under an unlimited subscription, the field value is Unlimited.
• Active on – depending on the key type:
  • the number of protected virtual machines for which the key is used as the active key
  • the number of SVMs on which the key is added as an active key.
• Used as reserve – the number of SVMs on which the key is added as a reserve key. If you are using the solution under a subscription, the field value is Unavailable or 0.

For a subscription key, the table may also display the following information:

• Type of validity period restriction – if the solution is being used under an unlimited subscription, Unlimited is displayed in the field.
• Grace period – if the subscription has the "Grace period activated" status, the field shows the number of remaining days during which the solution will continue to perform all of its functions. If the subscription has any other status, the field shows 0.
• Subscription provider's web address – web address of the service provider with whom the subscription is registered.
• Subscription status – current status of your subscription (active, paused, expired, canceled, grace period activated).

Basic key information is also displayed to the right of the key list when you select a key in the list.

You can also view basic information about the license key added to the key storage in the key properties window. The key properties window opens by double-clicking on the table row containing information about the key, or by double-clicking on the View license key properties link located to the right of the list of license keys.

To view information about the key in the properties of the activation task:

1. In the main window of Kaspersky Security Center Web Console, select Assets (Devices) → Tasks.

   A list of tasks opens.

2. Do one of the following:
   1. If you want to change the settings of a task that runs on all SVMs that are part of a specific administration group, click the link in the Current path field at the top of the window and select an administration group in the window that opens.

      The list displays only the tasks configured for the selected administration group.

   2. If you want to change the settings of a task that runs on one or more SVMs (tasks for a set of devices), click on the link in the Current path field at the top of the window and select the top node named Administration Server in the window that opens.

      The list will display all tasks created on the Administration Server.

3. In the list of tasks, select the required task and open the task properties window by clicking the link in the task name.
4. Select the Application settings tab.

The window displays the following information about the license and the key added to the SVM using this task:

• License key – a unique alphanumeric sequence.
• License type – trial, commercial, or commercial (subscription).
• License term – the period in days during which you can use the solution activated by adding this key, for example, 365 days. This field is not displayed if you are using the solution under a subscription. This field is not displayed if you are using the solution under a subscription.
• Grace period – the number of days after the subscription ends during which the solution retains its functionality. The field is displayed if you are using the solution under a subscription and the service provider with which you registered your subscription offers a grace period for renewing your subscription. If you are using the solution under an unlimited subscription, the field value is Unavailable.
• Expires on – the date when your right to use the solution activated with the current key expires. If the key was added on several SVMs at different times, this field shows the date for the SVM where the solution will expire soonest. If you are using the solution under an unlimited subscription, the field value is Unlimited.
• Restriction – depends on the key type:
  • the maximum number of virtual machines that you can protect
  • the maximum number of physical processor cores used across all hypervisors whose virtual machines you can protect
  • the maximum number of physical processors used across all hypervisors whose virtual machines you can protect
• Available functionality – by following the link, you can view information about the available solution functionality, which depends on the license edition.

To view information about the key in the properties of the activation task:

1. In the Kaspersky Security Center Administration Console, perform one of the following actions:
   • If you want to view the properties of a task that is executed on SVMs that are part of a specific administration group, select the administration group in the console tree, and then select the Tasks tab in the workspace.
   • If you want to view the properties of a task that runs one or more SVMs (tasks for a set of devices), select the Tasks folder in the console tree.
2. In the list of tasks, select the required task and double-click it to open the Settings: <Task name> window.

   You can also open the task properties window using the Settings item of the task context menu.

3. In the list on the left, select the Add a license key section.

In the right part of the window, the Adding a license key section displays the following information about the license and the key being added to the SVM using this task:

• License key – a unique alphanumeric sequence.
• License type – trial, commercial, or commercial (subscription).
• License term – the period in days during which you can use the solution activated by adding this key, for example, 365 days. This field is not displayed if you are using the solution under a subscription. This field is not displayed if you are using the solution under a subscription.
• Grace period – the number of days after the subscription ends during which the solution retains its functionality. The field is displayed if you are using the solution under a subscription and the service provider with which you registered your subscription offers a grace period for renewing your subscription. If you are using the solution under an unlimited subscription, the field value is Unavailable.
• Expires on – the date when your right to use the solution activated with the current key expires. If the key was added on several SVMs at different times, this field shows the date for the SVM where the solution will expire soonest. If you are using the solution under an unlimited subscription, the field value is Unlimited.
• Restriction – depends on the key type:
  • the maximum number of virtual machines that you can protect
  • the maximum number of physical processor cores used across all hypervisors whose virtual machines you can protect
  • the maximum number of physical processors used across all hypervisors whose virtual machines you can protect
• Available functionality – by following the link, you can view information about the available solution functionality, which depends on the license type.

To view information about keys added to an SVM:

1. In the main window of Kaspersky Security Center Web Console, select Assets (Devices) → Managed devices.

   The list of managed devices opens.

2. Select the administration group containing the desired SVM. To do so, click the link in the Current path field located above the list of managed devices and select an administration group in the window that opens.

   The list will display only managed devices in the selected administration group.

3. Find the desired SVM in the list and click on the SVM name.
4. In the SVM properties window that opens, select the Applications tab.
5. Click on the name Kaspersky Security for Virtualization 6.2 Light Agent – Protection Server in the list.

   The properties window for the Protection Server on this SVM will open.

6. On the General tab, select the License section in the list on the left.

   The right part of the window displays a list of license keys added to the SVM. The following information is displayed for each key:

   • License key status – key status: active or reserve.
   • Application name – the name of the license associated with the key and information about this license.
   • License Key – a license key, a unique alphanumeric sequence.
   • License type – trial, commercial, or subscription.
   • Activation date – the date when the solution was activated with this key.
   • Term – the date when your right to use the solution activated with the current key expires. If the key was added on several SVMs at different times, this field shows the date for the SVM where the solution will expire soonest. If you are using the solution under an unlimited subscription, the field value is Unlimited.
7. If you want to view additional information about the key, click on the license name. In the window that opens, you can view the following information:
   • License term (days) – the period in days during which you can use the solution activated by adding this key, for example, 365 days. This field is not displayed if you are using the solution under a subscription.
   • Maximum number of devices – depends on the key type:
     • the maximum number of virtual machines that you can protect
     • the maximum number of physical processor cores used across all hypervisors whose virtual machines you can protect
     • the maximum number of physical processors used across all hypervisors whose virtual machines you can protect

To view information about keys added to an SVM:

1. In the Kaspersky Security Center Administration Console tree, in the Managed devices folder, select the administration group that includes the desired SVM.
2. In the workspace, select the Devices tab.
3. Find the desired SVM in the list and double-click to open the Settings: <SVM name> window.
4. In the displayed SVM properties window, in the list on the left, select the Applications section.
5. In the right part of the window, select Kaspersky Security for Virtualization 6.2 Light Agent – Protection Server in the list and open the properties window of the Protection Server on this SVM by double-clicking or using the Properties button at the bottom of the window.

   In the window that opens, in the list on the left, select the License keys section.

The right part of the window displays a list of license keys added to the SVM. The following information is displayed for each key:

• Serial number – a license key, a unique alphanumeric sequence.
• Status – key status: active or reserve.
• Type – trial, commercial, or subscription.
• License term – the period in days during which you can use the solution activated by adding this key, for example, 365 days. This field is not displayed if you are using the solution under a subscription.
• License restrictions – depends on the key type:
  • the maximum number of virtual machines that you can protect
  • the maximum number of physical processor cores used across all hypervisors whose virtual machines you can protect
  • the maximum number of physical processors used across all hypervisors whose virtual machines you can protect
• Activation date – the date when the solution was activated with this key.
• Term – the date when your right to use the solution activated with the current key expires. If the key was added on several SVMs at different times, this field shows the date for the SVM where the solution will expire soonest. If you are using the solution under an unlimited subscription, the field value is Unlimited.

To generate a key usage report:

1. In the main window of Kaspersky Security Center Web Console, select Monitoring and reporting → Reports.

   A list of report templates opens.

2. Find the License key usage report template in the list and generate the report by clicking on the template name.

   The generated license key usage report opens in a separate window.

The license key usage report has two tabs:

• The Summary tab contains a chart with information about the use of keys in accordance with license restrictions and a summary table. The summary table contains information about all used license keys.
• The Details tab contains a table of detailed information. The detailed table contains information about the SVMs to which keys have been added, or about the protected virtual machines the key is being used for.

You can change the amount of displayed report information by configuring the display of table columns in the Edit the license key usage report window. The window opens via the Edit button at the top of the report window. For more information about configuring the appearance of reports, see the Kaspersky Security Center Help.

To generate a key usage report:

1. In the Kaspersky Security Center Administration Console tree, select the Administration Server <server name> node and go to the Reports tab.

   A list of report templates opens.

2. Find the License key usage report template in the list and generate the report by double-clicking or using the Show report link located to the right of the list of report templates.

   The generated license key usage report opens in a separate window.

The license key usage report contains:

• A chart with information about the use of keys in accordance with license restrictions.
• Summary table. The table contains information about all used license keys.
• Detailed table. The table contains information about the SVMs to which keys have been added, or about the protected virtual machines the key is being used for.

You can change the amount of displayed report information by configuring the display of table columns in the Columns window. The window opens via the Configure report columns link located at the top of the report window.