SVM removal using the Integration Server Web Console

To remove an SVM using Integration Server Web Console, you need to create and run an SVM removal task for the Integration Server to remove the selected SVM.

After it starts, the task appears in the task list in Integration Server Web Console, in the SVM management section, and is added to the task queue on the Integration Server. You can view information about each task and its execution status.

When the task completes successfully, the selected SVM is removed.

To create and run an SVM removal task for the Integration Server:

1. Open Integration Server Web Console and connect to the Integration Server.
2. Go to the SVM management section.
3. Click the New task button and select SVM removal from the drop-down list.

   The Integration Server New Task Wizard will start.

4. Follow the wizard instructions.

Selecting SVMs to remove

In this step, you need to select one or more SVMs that you want to remove.

The table displays information about the virtual infrastructures to which connections are configured for the Integration Server. The table also contains information about deployed SVMs. Each row of the table displays the following information about the virtual infrastructure object:

• Name/Address

  This column contains the IP addresses or fully qualified domain names (FQDN) of the virtual infrastructure objects to which the Integration Server connects, and the names of the SVMs deployed on the hypervisors.

  Depending on the type of virtual infrastructure, the column may display:

  • IP address or the fully qualified domain name (FQDN) of the virtual infrastructure administration server
  • IP address or the fully qualified domain name of the hypervisor
  • IP address or the fully qualified domain name of the Keystone microservice
  • OpenStack project and domain name.
• Status

  This column contains information about the status of the Integration Server's connection to the virtual infrastructure, the state of the infrastructure objects to which the connection is made, and the state of the SVMs deployed in the infrastructure.

  If the Integration Server is not connected to the virtual infrastructure object, the column displays an error message.

• SVM version

  This column contains the SVM version number.

• Infrastructure object type

  The column contains the type of the virtual infrastructure object that the Integration Server will connect to.

You can search the list of virtual infrastructure objects based on the Name/Address column. The table displays only those virtual infrastructure objects that meet the search criteria. To reset the search results, delete the contents of the search field.

You can update the list of virtual infrastructure objects using the Refresh button above the table. When updating a list, the Integration Server verifies the SSL certificates or fingerprints of the public key, just like what happens when adding virtual infrastructure objects to the list.

If the virtual infrastructure from which you want to remove the SVM is not in the list, you need to configure a connection from the Integration Server to this virtual infrastructure.

To select the SVMs to remove:

In the table, select the check boxes on the left of the SVMs that you want to remove.

If SVMs are being removed from an infrastructure based on the OpenStack platform, VK Cloud platform, or TIONIX Cloud Platform, simultaneous reconfiguration of SVMs deployed in different infrastructures is not supported. You can remove SVMs in only one of these infrastructures at a time, or in one or more infrastructures of other types.

The simultaneous removal of SVMs within OpenStack projects, which are running on different Keystone microservices, is not supported. You can simultaneously remove SVMs deployed within OpenStack projects that are running on the same Keystone microservice.

Proceed to the next step of the wizard.

Start an SVM removal task

This step displays information about the SVMs that will be removed by the task.

To start the SVM removal task, click the Start button.

You can monitor the task progress in Integration Server Web Console, in the SVM management section.