Program installation requirements

General application installation requirements

You can install the application on the following operating systems:

Oracle Linux
Astra Linux
Ubuntu
RED OS
M OS
Supported operating system versions are listed in the Hardware and software requirements section.

Supported configurations are Server and Server with GUI support. In the Server with GUI support configuration, you do not need to install additional packages for reporting.

RED OS 8 is supported without high availability (HA). When using RED OS 8 in the Server with GUI support configuration, you need to install the iscsi-initiator-utils package, and then run the following commands:

systemctl enable iscsid

systemctl start iscsid

Before deploying the application, make sure the following conditions are met:

Servers on which you want to install the components satisfy the hardware and software requirements.
Ports to be used by the installed instance of KUMA are available.
KUMA components are addressed using the fully qualified domain name (FQDN) of the host in the hostname.example.com format. Before you install the application, make sure that the correct host FQDN is returned in the Static hostname field. To do so, run the following command:
hostnamectl status
The server where the installer is run does not have the name localhost or localhost.<domain>.
The name of the server on which you are installing KUMA Core does not start with a numeral.
Time synchronization over Network Time Protocol (NTP) is configured on all servers with KUMA services.

Installation requirements for Oracle Linux, Astra Linux, Ubuntu, RED OS, and M OS devices

	Oracle Linux	Astra Linux	Ubuntu	RED OS	M OS
Python version	3.6 to 3.11. Hosts with Python earlier than 3.6 (inclusive) cannot be combined in the same instance with Python 3.10 and later hosts.	3.6 to 3.11. Hosts with Python earlier than 3.6 (inclusive) cannot be combined in the same instance with Python 3.10 and later hosts.	3.6 to 3.11. Hosts with Python earlier than 3.6 (inclusive) cannot be combined in the same instance with Python 3.10 and later hosts.	3.6 to 3.11. Hosts with Python earlier than 3.6 (inclusive) cannot be combined in the same instance with Python 3.10 and later hosts.	3.6 to 3.11. Hosts with Python earlier than 3.6 (inclusive) cannot be combined in the same instance with Python 3.10 and later hosts.
SELinux module	Disabled	Disabled	Disabled	Disabled	Disabled
Package manager	pip3	pip3	pip3	pip3	pip3
Basic packages	netaddr firewalld compat-openssl11 You need to install this package on the Oracle Linux 9 host on which the KUMA Core will be deployed outside the cluster. More on upgrading from Oracle Linux 8.x to Oracle Linux 9.x. To install the packages, run the following commands: `pip3 install netaddr` `yum install firewalld` `yum install compat-openssl11`	python3-apt curl libcurl4 To install the packages, run the following command: `apt install python3-apt curl libcurl4`	python3-apt curl libcurl4 openssl 1.1.1 acl To install the packages, run the following command: `apt install python3-apt curl libcurl4 acl` You can download the openssl1.1.1 package from the official website of Ubuntu and install it using the following command: `dpkg -i libssl1.1_1.1.1f-1ubuntu2_amd64.deb`	netaddr firewalld compat-openssl11 You need to install this package on the RED OS 7.3.4 or 8 host on which the KUMA Core will be deployed outside the cluster. dnf install openssl1.1 You need to install this package on RED OS 8. To install the packages, run the following commands: `pip3 install netaddr` `dnf install firewalld` `dnf install compat-openssl11`	python3-apt To install the package, run the following commands: `zypper refresh` `zypper install python3-rpm`
Dependent packages	No value.	netaddr python3-cffi-backend To install the packages, run the following command: `apt install python3-netaddr python3-cffi-backend` If you plan to query Oracle DB databases from KUMA, you need to install the Astra Linux libaio1 package.	netaddr python3-cffi-backend To install the packages, run the following command: `apt install python3-netaddr python3-cffi-backend`	No value.	No value.
Packages that must be installed on a device with the KUMA Core for correct generation and downloading of reports	nss gtk2 atk libnss3.so libatk-1.0.so.0 libxkbcommon libdrm at-spi2-atk mesa-libgbm alsa-lib cups-libs libXcomposite libXdamage libXrandr To install the packages, run the following command: `yum install nss gtk2 atk libnss3.so libatk-1.0.so.0 libxkbcommon libdrm at-spi2-atk mesa-libgbm alsa-lib cups-libs libXcomposite libXdamage libXrandr`	libgtk2.0.0 libnss3 libatk-adaptor libdrm-common libgbm1 libxkbcommon0 libasound2 To install the packages, run the following command: `apt install libgtk2.0.0 libnss3 libatk-adaptor libdrm-common libgbm1 libxkbcommon0 libasound2`	libatk1.0-0 libgtk2.0-0 libatk-bridge2.0-0 libcups2 libxcomposite-dev libxdamage1 libxrandr2 libgbm-dev libxkbcommon-x11-0 libpangocairo-1.0-0 libasound2 To install the packages, run the following command: `apt install libatk1.0-0 libgtk2.0-0 libatk-bridge2.0-0 libcups2 libxcomposite-dev libxdamage1 libxrandr2 libgbm-dev libxkbcommon-x11-0 libpangocairo-1.0-0 libasound2`	nss gtk2 atk libnss3.so libatk-1.0.so.0 libxkbcommon libdrm at-spi2-atk mesa-libgbm alsa-lib cups-libs libXcomposite libXdamage libXrandr To install the packages, run the following command: `dnf install nss gtk2 atk libnss3.so libatk-1.0.so.0 libxkbcommon libdrm at-spi2-atk mesa-libgbm alsa-lib cups-libs libXcomposite libXdamage libXrandr`	No value.
User permissions required to install the application	No value.	You need to assign the required permissions to the user that will be installing the application: `sudo pdpl-user -i 63 <user that will be installing the application>`	No value.	No value.	No value.

Page top