Kaspersky SD-WAN
2.1
English

Contents

Manually running scripts

Expand all | Collapse all

You can run a script on an individual CPE device or on all devices that use the CPE template. To run a script manually, use the following instructions:

  • Manually running a script on a CPE device.

    To run a script on an individual CPE device:

    1. In the menu, go to the SD-WAN section.

      By default, the CPE subsection is displayed with a table of CPE devices.

    2. Click the CPE device.

      The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

    3. Select the Scripts tab.

      A table of scripts is displayed if at least one script has been added.

    4. Click Run next to the script.
    5. This opens a window; in that window, click Run.
  • Running a script on all devices that use the CPE template.

    When you run a script in a CPE template, you must choose whether you want to run the script on all devices that use the template or only on devices that have particular tags.

    To run a script on all devices that use the CPE template.

    1. In the menu, go to the SD-WAN → CPE templates subsection.

      A table of CPE templates is displayed.

    2. Click the CPE template.

      The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

    3. Select the Scripts tab.

      The tab displays settings for connecting the VNFM to the CPE device console, as well as a table of scripts, if at least one script is added.

    4. Click Run next to the script.
    5. This opens a window; in that window, select devices on which you want to run the script:
      • Run the script <script name> on all related CPEs – run the script on all devices that use the CPE template. This is the default setting.
      • Run the script <script name> on all related CPEs with specified tags — run the script on devices that use the CPE template and have specific tags.
    6. If you selected Run the script <script name> on all related CPEs with specified tags, specify the tags in the lower part of the page.
    7. Click Run.

If necessary, you can run all scripts added on an individual device or in a CPE template at the same time. To run all scripts, use the following instructions:

  • Running all scripts on an individual CPE device.

    To run all scripts on an individual CPE device:

    1. In the menu, go to the SD-WAN section.

      By default, the CPE subsection is displayed with a table of CPE devices.

    2. Click the CPE device.

      The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

    3. Select the Scripts tab.

      A table of scripts is displayed if at least one script has been added.

    4. In the upper part of the settings area, under Actions click Run scripts.
    5. This opens a window; in that window, click Run.
  • Run all scripts in the CPE template.

    When you run all scripts added to a CPE template, you must choose whether you want to run the scripts on all devices that use the template or only on devices that have particular tags.

    To run all scripts in a CPE template:

    1. In the menu, go to the SD-WAN → CPE templates subsection.

      A table of CPE templates is displayed.

    2. Click the CPE template.

      The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

    3. Select the Scripts tab.

      The tab displays settings for connecting the VNFM to the CPE device console, as well as a table of scripts, if at least one script is added.

    4. In the upper part of the settings area, under Actions click Run scripts.
    5. This opens a window; in that window, select devices on which you want to run the script:
      • Run all scripts on related CPEs to run the scripts on all devices that use the CPE template. This is the default setting.
      • Run all scripts on related CPEs with specified tagsto run the scripts on devices that use the CPE template and have certain tags.
    6. If you selected Run all scripts on related CPEs with specified tags, specify tags in the lower part of the page.
    7. Click Run.
Page top
[Topic 256452]