Specifying the SMTP Server

To specify an SMTP server:

1. In the menu, go to the System section.

   By default, the Monitoring tab is selected, which displays the Zabbix server connection settings.

2. Select the Notification → SMTP tab.

   The SMTP server connection settings are displayed.

3. Select the Enable check box to use the SMTP server. This check box is cleared by default.
4. In the SMTP server field, enter the IP address or domain name of the SMTP server.
5. In the SMTP server port field, enter the port number of the SMTP server. Range of values: 0 to 65,535. Default value: 25.
6. In the Sender email field, enter the email address from which the SMTP server sends notifications to users.
7. If you want to configure encryption of the connection between Kaspersky SD-WAN and the SMTP server, in the SSL/TLS drop-down list, select one of the following values:
   • None to leave the connection unencrypted. Default value.
   • STARTTLS to determine the encryption method and then establish an encrypted connection.
   • SMTPS to establish an encrypted connection straight away.
8. If you want to enable Kaspersky SD-WAN authentication on the SMTP server:
   1. Select the Authentication check box. This check box is cleared by default.
   2. In the Username field, enter the user name that Kaspersky SD-WAN uses to authenticate on the SMTP server. The maximum length of the name is 64 characters.
   3. In the Password field, enter the password that Kaspersky SD-WAN uses to authenticate on the SMTP server. The maximum length of the password is 64 characters. To see the entered password, you can click the show icon .
9. If you want to send a test message using the SMTP server:
   1. Click Test.
   2. This opens a window; in that window, enter the email address to which you want the SMTP server to send a test message.
   3. Click Send.

   A test message is sent to the specified email address with Notification test in the subject and body.

10. Click Apply.

The SMTP server is specified.