Managing CPE templates

You can view the table of CPE templates in the SD-WAN →CPE templates section. Information about CPE templates is displayed in the following columns of the table:

• ID is the ID of the CPE template.
• Name is the name of the CPE template.
• Usage specifies whether the CPE devices use a CPE template:
  • Yes
  • No
• Updated is the date and time when the CPE template settings were last modified.
• User is the name of the user which created the CPE template.
• Owner is the tenant to which the CPE template belongs.

The actions that you can perform with the table are described in the Managing solution component tables instructions.

You can manage CPE template settings on the following tabs:

• Information is the basic information about the CPE template. You can edit the name of the CPE template in the Name field.
• Multipathing are the path settings.
• Deactivation are settings for automatically removing and disabling the CPE device.
• Encryption are the traffic encryption settings.
• Scripts are scripts for additional configuration of the CPE device.
• SD-WAN are connection settings of a CPE device to the SD-WAN network The following tabs are displayed on this tab:
  • General settings contains the connection settings of a CPE device to the orchestrator and controller.
  • Interfaces contains SD-WAN interfaces.
• Topology contains topology tags for establishing links between CPE devices.
• Network contains network interfaces.
• BGP is the BGP protocol for exchanging routes between CPE devices and external network devices. The following tabs are displayed on this tab:
  • General settings contains the basic settings of the BGP protocol.
  • Neighbors contains BGP peers.
  • Peer groups contains BGP peer groups.
• VRF contains virtual routing and forwarding tables.
• OSPF covers the OSPF protocol for route exchange between CPE devices and external network devices. The following tabs are displayed on this tab:
  • General settings contains basic settings of the OSPF protocol.
  • OSPF areas contains OSPF areas.
  • OSPF interfaces contains OSPF interfaces.
• Routing filters contains settings for filtering routes and traffic packets between CPE devices and external network devices. The following tabs are displayed on this tab:
  • Access control lists contains access control lists (ACLs).
  • Prefix lists contains prefix lists.
  • Route maps contains route maps.
• BFD covers the BFD protocol for detecting routing failures between CPE devices and external network devices.
• Static routes contains static routes.
• Multicast contains settings for transmission of multicast traffic between CPE devices and external network devices using the PIM and IGMP protocols. The following tabs are displayed on this tab:
  • General settings contains basic PIM settings.
  • Interfaces contains multicast interfaces.
• VRRP covers the VRRP protocol for high availability of CPE devices. The following tabs are displayed on this tab:
  • VRRP instances contains VRRP instances.
  • VRRP instance groups contains VRRP instance groups.
• CFM contains settings of the Connectivity Fault Management (CFM) functionality.
• Monitoring contains CPE device monitoring settings.
• Transport services contains transport services.
• Log files contains logging settings.
• NTP contains NTP servers for time synchronization.
• VIM contains VIM settings. This tab is displayed only if the uCPE type is selected when creating the template.

In this section Creating a CPE template Importing a CPE template Cloning a CPE template Exporting orchestrator and controller connection settings and SD-WAN interfaces from a CPE template Exporting network interfaces from a CPE template Viewing the usage of a CPE template Deleting a CPE template

Page top